Tested by Chris Williams (BINGOS), 26. Sep, 01:40,
This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org
--
Dear Sebastian Riedel,
This is a computer-generated error report created automatically by CPANPLUS, version 0.9176. Testers personal comments may appear at the end of this report.
Thank you for uploading your work to CPAN. Congratulations! All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.22.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/mojo/asset.t ............................. ok t/mojo/base.t .............................. ok t/mojo/bytestream.t ........................ ok t/mojo/cache.t ............................. ok t/mojo/cgi.t ............................... ok t/mojo/collection.t ........................ ok t/mojo/content.t ........................... ok t/mojo/cookie.t ............................ ok t/mojo/cookiejar.t ......................... ok t/mojo/daemon.t ............................ ok t/mojo/daemon_ipv6_tls.t ................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/date.t .............................. ok t/mojo/delay.t ............................. ok t/mojo/dom.t ............................... ok t/mojo/eventemitter.t ...................... ok t/mojo/exception.t ......................... ok t/mojo/file.t .............................. ok t/mojo/headers.t ........................... ok t/mojo/home.t .............................. ok t/mojo/hypnotoad.t ......................... skipped: set TEST_HYPNOTOAD to enable this test (developer only!) t/mojo/ioloop.t ............................ ok t/mojo/ioloop_ipv6.t ....................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/ioloop_tls.t ........................ skipped: set TEST_TLS to enable this test (developer only!) t/mojo/json.t .............................. ok t/mojo/json_pointer.t ...................... ok t/mojo/json_xs.t ........................... skipped: Cpanel::JSON::XS 4.04+ required for this test! t/mojo/loader.t ............................ ok t/mojo/log.t ............................... ok t/mojo/morbo.t ............................. skipped: set TEST_MORBO to enable this test (developer only!) t/mojo/parameters.t ........................ ok t/mojo/path.t .............................. ok t/mojo/prefork.t ........................... skipped: set TEST_PREFORK to enable this test (developer only!) t/mojo/promise.t ........................... ok t/mojo/proxy.t ............................. ok t/mojo/psgi.t .............................. ok t/mojo/reactor_detect.t .................... ok t/mojo/reactor_ev.t ........................ skipped: set TEST_EV to enable this test (developer only!) t/mojo/reactor_poll.t ...................... ok t/mojo/request.t ........................... ok t/mojo/request_cgi.t ....................... ok t/mojo/response.t .......................... ok t/mojo/roles.t ............................. skipped: Role::Tiny 2.000001+ required for this test! t/mojo/signatures.t ........................ ok t/mojo/subprocess.t ........................ skipped: set TEST_SUBPROCESS to enable this test (developer only!) t/mojo/template.t .......................... ok t/mojo/tls.t ............................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/transactor.t ........................ ok t/mojo/url.t ............................... ok t/mojo/user_agent.t ........................ ok t/mojo/user_agent_online.t ................. skipped: set TEST_ONLINE to enable this test (developer only!) t/mojo/user_agent_socks.t .................. skipped: set TEST_SOCKS to enable this test (developer only!) t/mojo/user_agent_tls.t .................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/user_agent_unix.t ................... skipped: set TEST_UNIX to enable this test (developer only!) t/mojo/util.t .............................. ok t/mojo/websocket.t ......................... ok t/mojo/websocket_frames.t .................. ok t/mojo/websocket_proxy.t ................... ok t/mojo/websocket_proxy_tls.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/app.t ........................ ok t/mojolicious/charset_lite_app.t ........... ok t/mojolicious/command.t .................... ok t/mojolicious/commands.t ................... ok t/mojolicious/dispatch.t ................... ok t/mojolicious/dispatcher_lite_app.t ........ ok t/mojolicious/embedded_app.t ............... ok t/mojolicious/embedded_lite_app.t .......... ok t/mojolicious/exception_lite_app.t ......... ok t/mojolicious/external_app.t ............... ok t/mojolicious/external_lite_app.t .......... ok t/mojolicious/group_lite_app.t ............. ok t/mojolicious/json_config_lite_app.t ....... ok t/mojolicious/json_config_mode_lite_app.t .. ok t/mojolicious/layouted_lite_app.t .......... ok t/mojolicious/lite_app.t ................... ok t/mojolicious/longpolling_lite_app.t ....... ok t/mojolicious/multipath_lite_app.t ......... ok t/mojolicious/ojo.t ........................ ok t/mojolicious/ojo_signatures.t ............. ok t/mojolicious/pattern.t .................... ok t/mojolicious/pod_renderer_lite_app.t ...... ok t/mojolicious/production_app.t ............. ok t/mojolicious/rebased_lite_app.t ........... ok t/mojolicious/renderer.t ................... ok t/mojolicious/restful_lite_app.t ........... ok t/mojolicious/routes.t ..................... ok t/mojolicious/signatures_lite_app.t ........ ok t/mojolicious/static_lite_app.t ............ ok t/mojolicious/tag_helper_lite_app.t ........ ok t/mojolicious/testing_app.t ................ ok t/mojolicious/tls_lite_app.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/twinkle_lite_app.t ........... ok t/mojolicious/types.t ...................... ok t/mojolicious/upload_lite_app.t ............ ok t/mojolicious/upload_stream_lite_app.t ..... ok t/mojolicious/validation_lite_app.t ........ ok t/mojolicious/websocket_lite_app.t ......... ok t/pod.t .................................... skipped: set TEST_POD to enable this test (developer only!) t/pod_coverage.t ........................... skipped: set TEST_POD to enable this test (developer only!) All tests successful. Files=98, Tests=11136, 42 wallclock secs ( 1.01 usr 0.17 sys + 30.58 cusr 2.82 csys = 34.58 CPU) Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we managed to load:
Module Name Have Want ExtUtils::MakeMaker 7.34 0 IO::Socket::IP 0.37 0.37 JSON::PP 2.27300_01 2.27103 Pod::Simple 3.29 3.09 Time::Local 1.2300 1.2
Perl module toolchain versions installed: Module Name Have CPANPLUS 0.9176 CPANPLUS::Dist::Build 0.90 Cwd 3.74 ExtUtils::CBuilder 0.280230 ExtUtils::Command 7.34 ExtUtils::Install 2.14 ExtUtils::MakeMaker 7.34 ExtUtils::Manifest 1.71 ExtUtils::ParseXS 3.35 File::Spec 3.74 Module::Build 0.4224 Pod::Parser 1.63 Pod::Simple 3.29 Test2 1.302136 Test::Harness 3.42 Test::More 1.302136 version 0.9924
******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) **********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02. Powered by minismokebox version 0.68
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/lib:/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 20470
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.22.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.22.4/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 22 subversion 4) configuration:
Platform:
osname=linux, osvers=4.4.0-83-generic, archname=x86_64-linux-thread-multi
uname='linux uchder 4.4.0-83-generic #106-ubuntu smp mon jun 26 17:54:43 utc 2017 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.22.4 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='5.4.0 20160609', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/5/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.23.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.23'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.48
Built under linux
Compiled at Jul 16 2017 11:37:40
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/lib:/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="20470"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.22.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/lib
/home/cpan/pit/thr/conf/perl-5.22.4/.cpanplus/5.22.4/build/XjQ7gykJVf/Mojolicious-8.01/blib/arch
/home/cpan/pit/thr/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.22.4/lib/site_perl/5.22.4
/home/cpan/pit/thr/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.22.4/lib/5.22.4