Mojolicious 8.01 Pass

Tested by Chris Williams (BINGOS), 28. Sep, 11:18,

  1. Program output
  2. Tester comments
  3. Prerequisites
  4. Environment and other context
  5. More reports...

This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org

--

Dear Sebastian Riedel,

This is a computer-generated error report created automatically by CPANPLUS, version 0.9176. Testers personal comments may appear at the end of this report.

Thank you for uploading your work to CPAN. Congratulations! All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.22.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/mojo/asset.t ............................. ok t/mojo/base.t .............................. ok t/mojo/bytestream.t ........................ ok t/mojo/cache.t ............................. ok t/mojo/cgi.t ............................... ok t/mojo/collection.t ........................ ok t/mojo/content.t ........................... ok t/mojo/cookie.t ............................ ok t/mojo/cookiejar.t ......................... ok t/mojo/daemon.t ............................ ok t/mojo/daemon_ipv6_tls.t ................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/date.t .............................. ok t/mojo/delay.t ............................. ok t/mojo/dom.t ............................... ok t/mojo/eventemitter.t ...................... ok t/mojo/exception.t ......................... ok t/mojo/file.t .............................. ok t/mojo/headers.t ........................... ok t/mojo/home.t .............................. ok t/mojo/hypnotoad.t ......................... skipped: set TEST_HYPNOTOAD to enable this test (developer only!) t/mojo/ioloop.t ............................ ok t/mojo/ioloop_ipv6.t ....................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/ioloop_tls.t ........................ skipped: set TEST_TLS to enable this test (developer only!) t/mojo/json.t .............................. ok t/mojo/json_pointer.t ...................... ok t/mojo/json_xs.t ........................... skipped: Cpanel::JSON::XS 4.04+ required for this test! t/mojo/loader.t ............................ ok t/mojo/log.t ............................... ok t/mojo/morbo.t ............................. skipped: set TEST_MORBO to enable this test (developer only!) t/mojo/parameters.t ........................ ok t/mojo/path.t .............................. ok t/mojo/prefork.t ........................... skipped: set TEST_PREFORK to enable this test (developer only!) t/mojo/promise.t ........................... ok t/mojo/proxy.t ............................. ok t/mojo/psgi.t .............................. ok t/mojo/reactor_detect.t .................... ok t/mojo/reactor_ev.t ........................ skipped: set TEST_EV to enable this test (developer only!) t/mojo/reactor_poll.t ...................... ok t/mojo/request.t ........................... ok t/mojo/request_cgi.t ....................... ok t/mojo/response.t .......................... ok t/mojo/roles.t ............................. skipped: Role::Tiny 2.000001+ required for this test! t/mojo/signatures.t ........................ ok t/mojo/subprocess.t ........................ skipped: set TEST_SUBPROCESS to enable this test (developer only!) t/mojo/template.t .......................... ok t/mojo/tls.t ............................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/transactor.t ........................ ok t/mojo/url.t ............................... ok t/mojo/user_agent.t ........................ ok t/mojo/user_agent_online.t ................. skipped: set TEST_ONLINE to enable this test (developer only!) t/mojo/user_agent_socks.t .................. skipped: set TEST_SOCKS to enable this test (developer only!) t/mojo/user_agent_tls.t .................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/user_agent_unix.t ................... skipped: set TEST_UNIX to enable this test (developer only!) t/mojo/util.t .............................. ok t/mojo/websocket.t ......................... ok t/mojo/websocket_frames.t .................. ok t/mojo/websocket_proxy.t ................... ok t/mojo/websocket_proxy_tls.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/app.t ........................ ok t/mojolicious/charset_lite_app.t ........... ok t/mojolicious/command.t .................... ok t/mojolicious/commands.t ................... ok t/mojolicious/dispatch.t ................... ok t/mojolicious/dispatcher_lite_app.t ........ ok t/mojolicious/embedded_app.t ............... ok t/mojolicious/embedded_lite_app.t .......... ok t/mojolicious/exception_lite_app.t ......... ok t/mojolicious/external_app.t ............... ok t/mojolicious/external_lite_app.t .......... ok t/mojolicious/group_lite_app.t ............. ok t/mojolicious/json_config_lite_app.t ....... ok t/mojolicious/json_config_mode_lite_app.t .. ok t/mojolicious/layouted_lite_app.t .......... ok t/mojolicious/lite_app.t ................... ok t/mojolicious/longpolling_lite_app.t ....... ok t/mojolicious/multipath_lite_app.t ......... ok t/mojolicious/ojo.t ........................ ok t/mojolicious/ojo_signatures.t ............. ok t/mojolicious/pattern.t .................... ok t/mojolicious/pod_renderer_lite_app.t ...... ok t/mojolicious/production_app.t ............. ok t/mojolicious/rebased_lite_app.t ........... ok t/mojolicious/renderer.t ................... ok t/mojolicious/restful_lite_app.t ........... ok t/mojolicious/routes.t ..................... ok t/mojolicious/signatures_lite_app.t ........ ok t/mojolicious/static_lite_app.t ............ ok t/mojolicious/tag_helper_lite_app.t ........ ok t/mojolicious/testing_app.t ................ ok t/mojolicious/tls_lite_app.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/twinkle_lite_app.t ........... ok t/mojolicious/types.t ...................... ok t/mojolicious/upload_lite_app.t ............ ok t/mojolicious/upload_stream_lite_app.t ..... ok t/mojolicious/validation_lite_app.t ........ ok t/mojolicious/websocket_lite_app.t ......... ok t/pod.t .................................... skipped: set TEST_POD to enable this test (developer only!) t/pod_coverage.t ........................... skipped: set TEST_POD to enable this test (developer only!) All tests successful. Files=98, Tests=11136, 91 wallclock secs ( 2.09 usr 0.55 sys + 69.27 cusr 11.53 csys = 83.45 CPU) Result: PASS

PREREQUISITES:

Here is a list of prerequisites you specified and versions we managed to load:

Module Name Have Want ExtUtils::MakeMaker 7.34 0 IO::Socket::IP 0.37 0.37 JSON::PP 2.27300 2.27103 Pod::Simple 3.29 3.09 Time::Local 1.2300 1.2

Perl module toolchain versions installed: Module Name Have CPANPLUS 0.9176 CPANPLUS::Dist::Build 0.90 Cwd 3.74 ExtUtils::CBuilder 0.280230 ExtUtils::Command 7.34 ExtUtils::Install 2.14 ExtUtils::MakeMaker 7.34 ExtUtils::Manifest 1.71 ExtUtils::ParseXS 3.35 File::Spec 3.74 Module::Build 0.4224 Pod::Parser 1.63 Pod::Simple 3.29 Test2 1.302136 Test::Harness 3.42 Test::More 1.302136 version 0.9924

******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) **********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02. Powered by minismokebox version 0.68

Program output



  

Prerequisites

Requires

Build requires

Configure requires

Tester comments

Environment and other context

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/script:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 28949
    PERL5_CPANPLUS_IS_VERSION = 0.9176
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.22.0
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    PERL_USE_UNSAFE_INC = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/thr/perl-5.22.0/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1002 1002
    EGID: $)  = 1002 1002


-------------------------------


--

Summary of my perl5 (revision 5 version 22 subversion 0) configuration:
   
  Platform:
    osname=freebsd, osvers=11.1-release, archname=i386-freebsd-thread-multi
    uname='freebsd ffyrc 11.1-release freebsd 11.1-release #0 r321309: fri jul 21 04:10:47 utc 2017 root@releng2.nyi.freebsd.org:usrobjusrsrcsysgeneric i386 '
    config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.22.0 -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_FORTIFY_SOURCE=2',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 4.0.0 (tags/RELEASE_400/final 297347)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -fstack-protector-strong -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib /usr/bin/../lib/clang/4.0.0/lib /usr/lib
    libs=-lpthread -lgdbm -lm -lcrypt -lutil
    perllibs=-lpthread -lm -lcrypt -lutil
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector-strong'


Characteristics of this binary (from libperl): 
  Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
                        PERL_DONT_CREATE_GVSV
                        PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
                        PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
                        USE_ITHREADS USE_LARGE_FILES USE_LOCALE
                        USE_LOCALE_COLLATE USE_LOCALE_CTYPE
                        USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
                        USE_PERL_ATOF USE_REENTRANT_API
  Locally applied patches:
	Devel::PatchPerl 1.48
  Built under freebsd
  Compiled at Jul 29 2017 09:57:15
  %ENV:
    PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="28949"
    PERL5_CPANPLUS_IS_VERSION="0.9176"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.22.0"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
    PERL_USE_UNSAFE_INC="1"
  @INC:
    /usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.22.0/.cpanplus/5.22.0/build/Ua7A3NPqH8/Mojolicious-8.01/blib/arch
    /usr/home/cpan/pit/thr/perl-5.22.0/lib/site_perl/5.22.0/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.22.0/lib/site_perl/5.22.0
    /usr/home/cpan/pit/thr/perl-5.22.0/lib/5.22.0/i386-freebsd-thread-multi
    /usr/home/cpan/pit/thr/perl-5.22.0/lib/5.22.0