Mojolicious 8.01 Fail

Tested by Nigel Horne, 1. Oct 2018,

  1. Program output
  2. Tester comments
  3. Prerequisites
  4. Environment and other context
  5. More reports...

This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org

-- Dear Sebastian Riedel,

This is a computer-generated report for Mojolicious-8.01 on perl 5.26.2, created by CPAN-Reporter-1.2018.

Thank you for uploading your work to CPAN. However, there was a problem testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki for suggestions on how to avoid getting FAIL reports for missing library or binary dependencies, unsupported operating systems, and so on:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Program output

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 "/mnt/nas/home/pi2/njh/perl5/perlbrew/perls/perl-5.26.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t
t/mojo/cache.t ............................. ok
t/mojo/base.t .............................. ok
t/mojo/bytestream.t ........................ ok
t/mojo/asset.t ............................. ok
t/mojo/content.t ........................... ok
t/mojo/collection.t ........................ ok
t/mojo/cookie.t ............................ ok
t/mojo/cgi.t ............................... ok
t/mojo/cookiejar.t ......................... ok
t/mojo/date.t .............................. ok
t/mojo/daemon_ipv6_tls.t ................... skipped: set TEST_IPV6 to enable this test (developer only!)
t/mojo/daemon.t ............................ ok
t/mojo/delay.t ............................. ok
t/mojo/eventemitter.t ...................... ok
t/mojo/exception.t ......................... ok
t/mojo/file.t .............................. ok
t/mojo/headers.t ........................... ok
Out of memory!
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 1 just after 1033.
t/mojo/dom.t ............................... 
Dubious, test returned 1 (wstat 256, 0x100)
All 1033 subtests passed 
t/mojo/home.t .............................. ok
t/mojo/hypnotoad.t ......................... skipped: set TEST_HYPNOTOAD to enable this test (developer only!)
t/mojo/ioloop_tls.t ........................ skipped: set TEST_TLS to enable this test (developer only!)
t/mojo/ioloop_ipv6.t ....................... skipped: set TEST_IPV6 to enable this test (developer only!)
t/mojo/json.t .............................. ok
t/mojo/ioloop.t ............................ ok
t/mojo/json_pointer.t ...................... ok
t/mojo/json_xs.t ........................... ok
t/mojo/log.t ............................... ok
t/mojo/parameters.t ........................ ok
t/mojo/loader.t ............................ ok
t/mojo/morbo.t ............................. skipped: set TEST_MORBO to enable this test (developer only!)
t/mojo/path.t .............................. ok
t/mojo/proxy.t ............................. ok
t/mojo/prefork.t ........................... skipped: set TEST_PREFORK to enable this test (developer only!)
t/mojo/promise.t ........................... ok
t/mojo/reactor_detect.t .................... ok
t/mojo/reactor_ev.t ........................ skipped: set TEST_EV to enable this test (developer only!)
t/mojo/psgi.t .............................. ok
t/mojo/request_cgi.t ....................... ok
t/mojo/reactor_poll.t ...................... ok
t/mojo/response.t .......................... ok
t/mojo/roles.t ............................. skipped: Role::Tiny 2.000001+ required for this test!
t/mojo/signatures.t ........................ ok
t/mojo/request.t ........................... ok
t/mojo/subprocess.t ........................ skipped: set TEST_SUBPROCESS to enable this test (developer only!)
t/mojo/tls.t ............................... skipped: set TEST_TLS to enable this test (developer only!)
t/mojo/template.t .......................... ok
t/mojo/url.t ............................... ok
t/mojo/transactor.t ........................ ok
t/mojo/user_agent_online.t ................. skipped: set TEST_ONLINE to enable this test (developer only!)
t/mojo/user_agent_socks.t .................. skipped: set TEST_SOCKS to enable this test (developer only!)
t/mojo/user_agent_tls.t .................... skipped: set TEST_TLS to enable this test (developer only!)
t/mojo/user_agent_unix.t ................... skipped: set TEST_UNIX to enable this test (developer only!)
t/mojo/user_agent.t ........................ ok
t/mojo/util.t .............................. ok
t/mojo/websocket_frames.t .................. ok
t/mojo/websocket.t ......................... ok
t/mojo/websocket_proxy.t ................... ok
t/mojo/websocket_proxy_tls.t ............... skipped: set TEST_TLS to enable this test (developer only!)
t/mojolicious/command.t .................... ok
t/mojolicious/charset_lite_app.t ........... ok
t/mojolicious/commands.t ................... ok
t/mojolicious/dispatch.t ................... ok
t/mojolicious/dispatcher_lite_app.t ........ ok
t/mojolicious/app.t ........................ ok
t/mojolicious/embedded_app.t ............... ok
t/mojolicious/external_app.t ............... ok
t/mojolicious/external_lite_app.t .......... ok
t/mojolicious/embedded_lite_app.t .......... ok
t/mojolicious/exception_lite_app.t ......... ok
t/mojolicious/json_config_lite_app.t ....... ok
t/mojolicious/json_config_mode_lite_app.t .. ok
t/mojolicious/group_lite_app.t ............. ok
t/mojolicious/layouted_lite_app.t .......... ok
t/mojolicious/multipath_lite_app.t ......... ok
t/mojolicious/ojo.t ........................ ok
t/mojolicious/longpolling_lite_app.t ....... ok
t/mojolicious/pattern.t .................... ok
t/mojolicious/ojo_signatures.t ............. ok
t/mojolicious/lite_app.t ................... ok
t/mojolicious/production_app.t ............. ok
t/mojolicious/rebased_lite_app.t ........... ok
t/mojolicious/pod_renderer_lite_app.t ...... ok
t/mojolicious/renderer.t ................... ok
t/mojolicious/routes.t ..................... ok
t/mojolicious/signatures_lite_app.t ........ ok
t/mojolicious/restful_lite_app.t ........... ok
t/mojolicious/static_lite_app.t ............ ok
t/mojolicious/testing_app.t ................ ok
t/mojolicious/tag_helper_lite_app.t ........ ok
t/mojolicious/tls_lite_app.t ............... skipped: set TEST_TLS to enable this test (developer only!)
t/mojolicious/twinkle_lite_app.t ........... ok
t/mojolicious/types.t ...................... ok
t/mojolicious/upload_lite_app.t ............ ok
t/mojolicious/upload_stream_lite_app.t ..... ok
t/pod.t .................................... skipped: set TEST_POD to enable this test (developer only!)
t/mojolicious/validation_lite_app.t ........ ok
t/pod_coverage.t ........................... skipped: set TEST_POD to enable this test (developer only!)
t/mojolicious/websocket_lite_app.t ......... ok

Test Summary Report
-------------------
t/mojo/dom.t                             (Wstat: 256 Tests: 1033 Failed: 0)
  Non-zero exit status: 1
  Parse errors: No plan found in TAP output
Files=98, Tests=11061, 94 wallclock secs (12.64 usr  1.85 sys + 298.79 cusr 33.32 csys = 346.60 CPU)
Result: FAIL
Failed 1/98 test programs. 0/11061 subtests failed.
Makefile:1408: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255

Prerequisites

Requires

Build requires

Configure requires

Tester comments

this report is from an automated smoke testing program and was not reviewed by a human for accuracy

Environment and other context

Environment variables:

    AUTOMATED_TESTING = 1
    HARNESS_OPTIONS = j4
    LANG = en_GB.UTF-8
    PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.26.2/bin:/home/njh/src/njh/smoker/bin:/usr/bin:/bin
    PERL5LIB = /home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/arch:/home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/lib
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 5801
    PERL5_CPAN_IS_RUNNING = 5801
    PERLBREW_HOME = /home/njh/.perlbrew
    PERLBREW_MANPATH = /home/njh/perl5/perlbrew/perls/perl-5.26.2/man
    PERLBREW_PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.26.2/bin
    PERLBREW_PERL = perl-5.26.2
    PERLBREW_ROOT = /home/njh/perl5/perlbrew
    PERLBREW_SHELLRC_VERSION = 0.84
    PERLBREW_VERSION = 0.84
    PERL_USE_UNSAFE_INC = 1
    SHELL = /bin/sh
    TEMP = /tmp/user/1000
    TMPDIR = /tmp/user/1000/testwrapper.5786

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /mnt/nas/home/pi2/njh/perl5/perlbrew/perls/perl-5.26.2/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 1000 4 20 24 25 27 29 30 44 46 60 100 101 108 997 998 999 1000
    $EGID = 1000 4 20 24 25 27 29 30 44 46 60 100 101 108 997 998 999 1000

Perl module toolchain versions installed:

    Module              Have      
    ------------------- ----------
    CPAN                2.18      
    CPAN::Meta          2.150010  
    Cwd                 3.67      
    ExtUtils::CBuilder  0.280230  
    ExtUtils::Command   7.34      
    ExtUtils::Install   2.14      
    ExtUtils::MakeMaker 7.34      
    ExtUtils::Manifest  1.71      
    ExtUtils::ParseXS   3.35      
    File::Spec          3.67      
    JSON                2.97001   
    JSON::PP            2.27400_02
    Module::Build       0.4224    
    Module::Signature   n/a       
    Parse::CPAN::Meta   2.150010  
    Test::Harness       3.38      
    Test::More          1.302136  
    YAML                1.26      
    YAML::Syck          1.30      
    version             0.9917    


--

Summary of my perl5 (revision 5 version 26 subversion 2) configuration:
   
  Platform:
    osname=linux
    osvers=4.9.59-v7+
    archname=armv7l-linux
    uname='linux pi2 4.9.59-v7+ #1047 smp sun oct 29 12:19:23 gmt 2017 armv7l gnulinux '
    config_args='-de -Dprefix=/home/njh/perl5/perlbrew/perls/perl-5.26.2 -Aeval:scriptdir=/home/njh/perl5/perlbrew/perls/perl-5.26.2/bin'
    hint=recommended
    useposix=true
    d_sigaction=define
    useithreads=undef
    usemultiplicity=undef
    use64bitint=undef
    use64bitall=undef
    uselongdouble=undef
    usemymalloc=n
    default_inc_excludes_dot=define
    bincompat5005=undef
  Compiler:
    cc='cc'
    ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
    optimize='-O2'
    cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    ccversion=''
    gccversion='6.3.0 20170516'
    gccosandvers=''
    intsize=4
    longsize=4
    ptrsize=4
    doublesize=8
    byteorder=1234
    doublekind=3
    d_longlong=define
    longlongsize=8
    d_longdbl=define
    longdblsize=8
    longdblkind=0
    ivtype='long'
    ivsize=4
    nvtype='double'
    nvsize=8
    Off_t='off_t'
    lseeksize=8
    alignbytes=8
    prototype=define
  Linker and Libraries:
    ld='cc'
    ldflags =' -fstack-protector-strong -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib/gcc/arm-linux-gnueabihf/6/include-fixed /usr/include/arm-linux-gnueabihf /usr/lib /lib/arm-linux-gnueabihf /lib /usr/lib/arm-linux-gnueabihf
    libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
    perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
    libc=libc-2.24.so
    so=so
    useshrplib=false
    libperl=libperl.a
    gnulibc_version='2.24'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs
    dlext=so
    d_dlsymun=undef
    ccdlflags='-Wl,-E'
    cccdlflags='-fPIC'
    lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'


Characteristics of this binary (from libperl): 
  Compile-time options:
    HAS_TIMES
    PERLIO_LAYERS
    PERL_COPY_ON_WRITE
    PERL_DONT_CREATE_GVSV
    PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
    PERL_MALLOC_WRAP
    PERL_OP_PARENT
    PERL_PRESERVE_IVUV
    USE_LARGE_FILES
    USE_LOCALE
    USE_LOCALE_COLLATE
    USE_LOCALE_CTYPE
    USE_LOCALE_NUMERIC
    USE_LOCALE_TIME
    USE_PERLIO
    USE_PERL_ATOF
  Built under linux
  Compiled at Apr 24 2018 00:44:51
  %ENV:
    PERL5LIB="/home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/arch:/home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/lib"
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="5801"
    PERL5_CPAN_IS_RUNNING="5801"
    PERLBREW_HOME="/home/njh/.perlbrew"
    PERLBREW_MANPATH="/home/njh/perl5/perlbrew/perls/perl-5.26.2/man"
    PERLBREW_PATH="/home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.26.2/bin"
    PERLBREW_PERL="perl-5.26.2"
    PERLBREW_ROOT="/home/njh/perl5/perlbrew"
    PERLBREW_SHELLRC_VERSION="0.84"
    PERLBREW_VERSION="0.84"
    PERL_USE_UNSAFE_INC="1"
  @INC:
    /home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/arch
    /home/njh/.cpan/build/Algorithm-Combinatorics-0.27-0/blib/lib
    /home/njh/perl5/perlbrew/perls/perl-5.26.2/lib/site_perl/5.26.2/armv7l-linux
    /home/njh/perl5/perlbrew/perls/perl-5.26.2/lib/site_perl/5.26.2
    /home/njh/perl5/perlbrew/perls/perl-5.26.2/lib/5.26.2/armv7l-linux
    /home/njh/perl5/perlbrew/perls/perl-5.26.2/lib/5.26.2