Tested by Chris Williams (BINGOS), 2. Oct 2018,
This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org
--
Dear SRI,
This is a computer-generated error report created automatically by CPANPLUS, version 0.9174. Testers personal comments may appear at the end of this report.
Thank you for uploading your work to CPAN. Congratulations! All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.18.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/mojo/asset.t ............................. ok t/mojo/base.t .............................. ok t/mojo/bytestream.t ........................ ok t/mojo/cache.t ............................. ok t/mojo/cgi.t ............................... ok t/mojo/collection.t ........................ ok t/mojo/content.t ........................... ok t/mojo/cookie.t ............................ ok t/mojo/cookiejar.t ......................... ok t/mojo/daemon.t ............................ ok t/mojo/daemon_ipv6_tls.t ................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/date.t .............................. ok t/mojo/delay.t ............................. ok t/mojo/dom.t ............................... ok t/mojo/eventemitter.t ...................... ok t/mojo/exception.t ......................... ok t/mojo/file.t .............................. ok t/mojo/headers.t ........................... ok t/mojo/home.t .............................. ok t/mojo/hypnotoad.t ......................... skipped: set TEST_HYPNOTOAD to enable this test (developer only!) t/mojo/ioloop.t ............................ ok t/mojo/ioloop_ipv6.t ....................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/ioloop_tls.t ........................ skipped: set TEST_TLS to enable this test (developer only!) t/mojo/json.t .............................. ok t/mojo/json_pointer.t ...................... ok t/mojo/json_xs.t ........................... skipped: Cpanel::JSON::XS 4.04+ required for this test! t/mojo/loader.t ............................ ok t/mojo/log.t ............................... ok t/mojo/morbo.t ............................. skipped: set TEST_MORBO to enable this test (developer only!) t/mojo/parameters.t ........................ ok t/mojo/path.t .............................. ok t/mojo/prefork.t ........................... skipped: set TEST_PREFORK to enable this test (developer only!) t/mojo/promise.t ........................... ok t/mojo/proxy.t ............................. ok t/mojo/psgi.t .............................. ok t/mojo/reactor_detect.t .................... ok t/mojo/reactor_ev.t ........................ skipped: set TEST_EV to enable this test (developer only!) t/mojo/reactor_poll.t ...................... ok t/mojo/request.t ........................... ok t/mojo/request_cgi.t ....................... ok t/mojo/response.t .......................... ok t/mojo/roles.t ............................. skipped: Role::Tiny 2.000001+ required for this test! t/mojo/signatures.t ........................ skipped: Perl 5.20+ required for this test! t/mojo/subprocess.t ........................ skipped: set TEST_SUBPROCESS to enable this test (developer only!) t/mojo/template.t .......................... ok t/mojo/tls.t ............................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/transactor.t ........................ ok t/mojo/url.t ............................... ok t/mojo/user_agent.t ........................ ok t/mojo/user_agent_online.t ................. skipped: set TEST_ONLINE to enable this test (developer only!) t/mojo/user_agent_socks.t .................. skipped: set TEST_SOCKS to enable this test (developer only!) t/mojo/user_agent_tls.t .................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/user_agent_unix.t ................... skipped: set TEST_UNIX to enable this test (developer only!) t/mojo/util.t .............................. ok t/mojo/websocket.t ......................... ok t/mojo/websocket_frames.t .................. ok t/mojo/websocket_proxy.t ................... ok t/mojo/websocket_proxy_tls.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/app.t ........................ ok t/mojolicious/charset_lite_app.t ........... ok t/mojolicious/command.t .................... ok t/mojolicious/commands.t ................... ok t/mojolicious/dispatch.t ................... ok t/mojolicious/dispatcher_lite_app.t ........ ok t/mojolicious/embedded_app.t ............... ok t/mojolicious/embedded_lite_app.t .......... ok t/mojolicious/exception_lite_app.t ......... ok t/mojolicious/external_app.t ............... ok t/mojolicious/external_lite_app.t .......... ok t/mojolicious/group_lite_app.t ............. ok t/mojolicious/json_config_lite_app.t ....... ok t/mojolicious/json_config_mode_lite_app.t .. ok t/mojolicious/layouted_lite_app.t .......... ok t/mojolicious/lite_app.t ................... ok t/mojolicious/longpolling_lite_app.t ....... ok t/mojolicious/multipath_lite_app.t ......... ok t/mojolicious/ojo.t ........................ ok t/mojolicious/ojo_signatures.t ............. skipped: Perl 5.20+ required for this test! t/mojolicious/pattern.t .................... ok t/mojolicious/pod_renderer_lite_app.t ...... ok t/mojolicious/production_app.t ............. ok t/mojolicious/rebased_lite_app.t ........... ok t/mojolicious/renderer.t ................... ok t/mojolicious/restful_lite_app.t ........... ok t/mojolicious/routes.t ..................... ok t/mojolicious/signatures_lite_app.t ........ skipped: Perl 5.20+ required for this test! t/mojolicious/static_lite_app.t ............ ok t/mojolicious/tag_helper_lite_app.t ........ ok t/mojolicious/testing_app.t ................ ok t/mojolicious/tls_lite_app.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/twinkle_lite_app.t ........... ok t/mojolicious/types.t ...................... ok t/mojolicious/upload_lite_app.t ............ ok t/mojolicious/upload_stream_lite_app.t ..... ok t/mojolicious/validation_lite_app.t ........ ok Use of uninitialized value $loop in hash element at /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/lib/Mojo/UserAgent.pm line 202. Mojo::Reactor::Poll: I/O watcher failed: Can't call method "remove" on an undefined value at /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/lib/Mojo/UserAgent.pm line 293. t/mojolicious/websocket_lite_app.t ......... ok t/pod.t .................................... skipped: set TEST_POD to enable this test (developer only!) t/pod_coverage.t ........................... skipped: set TEST_POD to enable this test (developer only!) All tests successful. Files=98, Tests=11124, 56 wallclock secs ( 1.58 usr 0.13 sys + 39.97 cusr 5.31 csys = 46.99 CPU) Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we managed to load:
Module Name Have Want ExtUtils::MakeMaker 7.34 0 IO::Socket::IP 0.39 0.37 JSON::PP 2.27400 2.27103 Pod::Simple 3.28 3.09 Time::Local 1.2300 1.2
Perl module toolchain versions installed: Module Name Have CPANPLUS 0.9174 CPANPLUS::Dist::Build 0.88 Cwd 3.74 ExtUtils::CBuilder 0.280230 ExtUtils::Command 7.34 ExtUtils::Install 2.14 ExtUtils::MakeMaker 7.34 ExtUtils::Manifest 1.71 ExtUtils::ParseXS 3.35 File::Spec 3.74 Module::Build 0.4224 Pod::Parser 1.60 Pod::Simple 3.28 Test2 1.302136 Test::Harness 3.42 Test::More 1.302136 version 0.9924
******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) **********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02. Powered by minismokebox version 0.68
Environment variables: AUTOMATED_TESTING = 1 NONINTERACTIVE_TESTING = 1 PATH = /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/arch:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/arch PERL5_CPANPLUS_IS_RUNNING = 24103 PERL5_CPANPLUS_IS_VERSION = 0.9174 PERL5_MINISMOKEBOX = 0.68 PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.18.1 PERL_EXTUTILS_AUTOINSTALL = --defaultdeps PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/pit/bare/perl-5.18.1/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 18 subversion 1) configuration: Platform: osname=netbsd, osvers=6.1.4, archname=amd64-netbsd uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 ' config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.18.1' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include' ccversion='', gccversion='4.5.3', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix perllibs=-lm -lcrypt -lutil -lc -lposix libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib -fstack-protector' Characteristics of this binary (from libperl): Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF Built under netbsd Compiled at May 9 2014 17:05:35 %ENV: PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/arch:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/arch" PERL5_CPANPLUS_IS_RUNNING="24103" PERL5_CPANPLUS_IS_VERSION="0.9174" PERL5_MINISMOKEBOX="0.68" PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.18.1" PERL_EXTUTILS_AUTOINSTALL="--defaultdeps" PERL_MM_USE_DEFAULT="1" @INC: /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/lib /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/sXt4lKRVvw/IO-Socket-IP-0.39/blib/arch /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/lib /home/cpan/pit/bare/conf/perl-5.18.1/.cpanplus/5.18.1/build/aSFOoS1Ni_/Mojolicious-8.01/blib/arch /home/cpan/pit/bare/perl-5.18.1/lib/site_perl/5.18.1/amd64-netbsd /home/cpan/pit/bare/perl-5.18.1/lib/site_perl/5.18.1 /home/cpan/pit/bare/perl-5.18.1/lib/5.18.1/amd64-netbsd /home/cpan/pit/bare/perl-5.18.1/lib/5.18.1