OpenAPI-Client 1.00 Pass

Tested by Chris Williams (BINGOS), 28. Feb, 19:17,

  1. Program output
  2. Tester comments
  3. Prerequisites
  4. Environment and other context
  5. More reports...

This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org

--

Dear JHTHORSEN,

This is a computer-generated error report created automatically by CPANPLUS, version 0.9910. Testers personal comments may appear at the end of this report.

Thank you for uploading your work to CPAN. Congratulations! All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.16.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-basic.t ................ ok t/body-validation.t ......... ok t/client.t .................. ok [2021-02-28 19:17:20.79049] [21889] [debug] [QV9BftXY] GET "/api" [2021-02-28 19:17:20.79142] [21889] [debug] [QV9BftXY] Routing to a callback [2021-02-28 19:17:20.79346] [21889] [debug] [QV9BftXY] 200 OK (0.002961s, 337.724/s) t/command-local-with-ref.t .. skipped: Can't locate object method "routes" via package "JSON::Validator::Schema" at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/OpenAPI/Client.pm line 77. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. [2021-02-28 19:17:21.24440] [21890] [debug] [NOsnrD-A] GET "/v1" [2021-02-28 19:17:21.24523] [21890] [debug] [NOsnrD-A] Routing to a callback [2021-02-28 19:17:21.24908] [21890] [debug] [NOsnrD-A] 200 OK (0.004676s, 213.858/s) Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. [2021-02-28 19:17:21.39164] [21890] [debug] [ejxiS0sp] POST "/v1/pets" [2021-02-28 19:17:21.39245] [21890] [debug] [ejxiS0sp] Routing to a callback [2021-02-28 19:17:21.39344] [21890] [debug] [ejxiS0sp] 200 OK (0.001778s, 562.430/s) Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. [2021-02-28 19:17:21.40010] [21890] [debug] [4rYYTmwz] POST "/v1/pets" [2021-02-28 19:17:21.40075] [21890] [debug] [4rYYTmwz] Routing to a callback [2021-02-28 19:17:21.40168] [21890] [debug] [4rYYTmwz] 200 OK (0.001567s, 638.162/s) t/command-local.t ........... ok t/command-remote.t .......... skipped: TEST_ONLINE=1 Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in vec at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. Use of uninitialized value $r in scalar assignment at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib/Mojolicious/Command/openapi.pm line 47. t/command.t ................. ok t/default-base-url.t ........ ok t/json-request.t ............ ok All tests successful. Files=9, Tests=72, 5 wallclock secs ( 0.04 usr 0.00 sys + 3.88 cusr 0.27 csys = 4.19 CPU) Result: PASS

PREREQUISITES:

Here is a list of prerequisites you specified and versions we managed to load:

Module Name Have Want JSON::Validator 4.14 4.14 Mojolicious::Plugin::OpenAPI 4.00 2.14 Test::More 1.302183 0.88

Perl module toolchain versions installed: Module Name Have CPANPLUS 0.9910 CPANPLUS::Dist::Build 0.90 Cwd 3.75 ExtUtils::CBuilder 0.280235 ExtUtils::Command 7.58 ExtUtils::Install 2.20 ExtUtils::MakeMaker 7.58 ExtUtils::Manifest 1.73 ExtUtils::ParseXS 3.35 File::Spec 3.75 Module::Build 0.4231 Pod::Parser 1.51 Pod::Simple 3.20 Test2 1.302183 Test::Harness 3.42 Test::More 1.302183 version 0.9928

******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) **********************************************************************

Additional comments:

This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08. Powered by minismokebox version 0.68

CPANPLUS is prefering Build.PL

Program output



  

Prerequisites

Requires

Build requires

Configure requires

Tester comments

Environment and other context

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = C.UTF-8
    LC_COLLATE = C
    NONINTERACTIVE_TESTING = 1
    PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    PERL5LIB = /home/cpan/pit/jail/CjJNzYzpSo/lib/perl5:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 21051
    PERL5_CPANPLUS_IS_VERSION = 0.9910
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.16.1
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/CjJNzYzpSo
    PERL_MB_OPT = --install_base "/home/cpan/pit/jail/CjJNzYzpSo"
    PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/CjJNzYzpSo
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/pit/thr/perl-5.16.1/bin/perl
    UID:  $<  = 1001
    EUID: $>  = 1001
    GID:  $(  = 1001 1001
    EGID: $)  = 1001 1001


-------------------------------


--

Summary of my perl5 (revision 5 version 16 subversion 1) configuration:
   
  Platform:
    osname=linux, osvers=5.4.12-1-lts, archname=x86_64-linux-thread-multi
    uname='linux august 5.4.12-1-lts #2-alpine smp thu, 16 jan 2020 12:53:54 utc x86_64 linux '
    config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.16.1 -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
    ccversion='', gccversion='9.2.0', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
    libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
    libs=-lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
    perllibs=-ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
                        PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
                        PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL
                        USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
                        USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
                        USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
                        USE_REENTRANT_API
  Locally applied patches:
	Devel::PatchPerl 1.82
  Built under linux
  Compiled at Jan 29 2020 04:17:56
  %ENV:
    PERL5LIB="/home/cpan/pit/jail/CjJNzYzpSo/lib/perl5:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="21051"
    PERL5_CPANPLUS_IS_VERSION="0.9910"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.16.1"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/CjJNzYzpSo"
    PERL_MB_OPT="--install_base "/home/cpan/pit/jail/CjJNzYzpSo""
    PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/CjJNzYzpSo"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/cpan/pit/jail/CjJNzYzpSo/lib/perl5/5.16.1/x86_64-linux-thread-multi
    /home/cpan/pit/jail/CjJNzYzpSo/lib/perl5/5.16.1
    /home/cpan/pit/jail/CjJNzYzpSo/lib/perl5/x86_64-linux-thread-multi
    /home/cpan/pit/jail/CjJNzYzpSo/lib/perl5
    /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/lib
    /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/h2YGl0CcNm/OpenAPI-Client-1.00/blib/arch
    /home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1/x86_64-linux-thread-multi
    /home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1
    /home/cpan/pit/thr/perl-5.16.1/lib/5.16.1/x86_64-linux-thread-multi
    /home/cpan/pit/thr/perl-5.16.1/lib/5.16.1