Tested by Chris Williams (BINGOS), 3. Oct 2018,
This distribution has been tested as part of the CPAN Testers project, supporting the Perl programming language. See http://wiki.cpantesters.org/ for more information or email questions to cpan-testers-discuss@perl.org
--
Dear SRI,
This is a computer-generated error report created automatically by CPANPLUS, version 0.9176. Testers personal comments may appear at the end of this report.
Thank you for uploading your work to CPAN. Congratulations! All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.16.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/mojo/asset.t ............................. ok t/mojo/base.t .............................. ok t/mojo/bytestream.t ........................ ok t/mojo/cache.t ............................. ok t/mojo/cgi.t ............................... ok t/mojo/collection.t ........................ ok t/mojo/content.t ........................... ok t/mojo/cookie.t ............................ ok t/mojo/cookiejar.t ......................... ok t/mojo/daemon.t ............................ ok t/mojo/daemon_ipv6_tls.t ................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/date.t .............................. ok t/mojo/delay.t ............................. ok t/mojo/dom.t ............................... ok t/mojo/eventemitter.t ...................... ok t/mojo/exception.t ......................... ok t/mojo/file.t .............................. ok t/mojo/headers.t ........................... ok t/mojo/home.t .............................. ok t/mojo/hypnotoad.t ......................... skipped: set TEST_HYPNOTOAD to enable this test (developer only!) t/mojo/ioloop.t ............................ ok t/mojo/ioloop_ipv6.t ....................... skipped: set TEST_IPV6 to enable this test (developer only!) t/mojo/ioloop_tls.t ........................ skipped: set TEST_TLS to enable this test (developer only!) t/mojo/json.t .............................. ok t/mojo/json_pointer.t ...................... ok t/mojo/json_xs.t ........................... skipped: Cpanel::JSON::XS 4.04+ required for this test! t/mojo/loader.t ............................ ok t/mojo/log.t ............................... ok t/mojo/morbo.t ............................. skipped: set TEST_MORBO to enable this test (developer only!) t/mojo/parameters.t ........................ ok t/mojo/path.t .............................. ok t/mojo/prefork.t ........................... skipped: set TEST_PREFORK to enable this test (developer only!) t/mojo/promise.t ........................... ok t/mojo/proxy.t ............................. ok t/mojo/psgi.t .............................. ok t/mojo/reactor_detect.t .................... ok t/mojo/reactor_ev.t ........................ skipped: set TEST_EV to enable this test (developer only!) t/mojo/reactor_poll.t ...................... ok t/mojo/request.t ........................... ok t/mojo/request_cgi.t ....................... ok t/mojo/response.t .......................... ok t/mojo/roles.t ............................. skipped: Role::Tiny 2.000001+ required for this test! t/mojo/signatures.t ........................ skipped: Perl 5.20+ required for this test! t/mojo/subprocess.t ........................ skipped: set TEST_SUBPROCESS to enable this test (developer only!) t/mojo/template.t .......................... ok t/mojo/tls.t ............................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/transactor.t ........................ ok t/mojo/url.t ............................... ok t/mojo/user_agent.t ........................ ok t/mojo/user_agent_online.t ................. skipped: set TEST_ONLINE to enable this test (developer only!) t/mojo/user_agent_socks.t .................. skipped: set TEST_SOCKS to enable this test (developer only!) t/mojo/user_agent_tls.t .................... skipped: set TEST_TLS to enable this test (developer only!) t/mojo/user_agent_unix.t ................... skipped: set TEST_UNIX to enable this test (developer only!) t/mojo/util.t .............................. ok t/mojo/websocket.t ......................... ok t/mojo/websocket_frames.t .................. ok t/mojo/websocket_proxy.t ................... ok t/mojo/websocket_proxy_tls.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/app.t ........................ ok t/mojolicious/charset_lite_app.t ........... ok t/mojolicious/command.t .................... ok t/mojolicious/commands.t ................... ok t/mojolicious/dispatch.t ................... ok t/mojolicious/dispatcher_lite_app.t ........ ok t/mojolicious/embedded_app.t ............... ok t/mojolicious/embedded_lite_app.t .......... ok t/mojolicious/exception_lite_app.t ......... ok t/mojolicious/external_app.t ............... ok t/mojolicious/external_lite_app.t .......... ok t/mojolicious/group_lite_app.t ............. ok t/mojolicious/json_config_lite_app.t ....... ok t/mojolicious/json_config_mode_lite_app.t .. ok t/mojolicious/layouted_lite_app.t .......... ok t/mojolicious/lite_app.t ................... ok t/mojolicious/longpolling_lite_app.t ....... ok t/mojolicious/multipath_lite_app.t ......... ok t/mojolicious/ojo.t ........................ ok t/mojolicious/ojo_signatures.t ............. skipped: Perl 5.20+ required for this test! t/mojolicious/pattern.t .................... ok t/mojolicious/pod_renderer_lite_app.t ...... ok t/mojolicious/production_app.t ............. ok t/mojolicious/rebased_lite_app.t ........... ok t/mojolicious/renderer.t ................... ok t/mojolicious/restful_lite_app.t ........... ok t/mojolicious/routes.t ..................... ok t/mojolicious/signatures_lite_app.t ........ skipped: Perl 5.20+ required for this test! t/mojolicious/static_lite_app.t ............ ok t/mojolicious/tag_helper_lite_app.t ........ ok t/mojolicious/testing_app.t ................ ok t/mojolicious/tls_lite_app.t ............... skipped: set TEST_TLS to enable this test (developer only!) t/mojolicious/twinkle_lite_app.t ........... ok t/mojolicious/types.t ...................... ok t/mojolicious/upload_lite_app.t ............ ok t/mojolicious/upload_stream_lite_app.t ..... ok t/mojolicious/validation_lite_app.t ........ ok t/mojolicious/websocket_lite_app.t ......... ok t/pod.t .................................... skipped: set TEST_POD to enable this test (developer only!) t/pod_coverage.t ........................... skipped: set TEST_POD to enable this test (developer only!) All tests successful. Files=98, Tests=11124, 86 wallclock secs ( 2.64 usr 1.11 sys + 53.88 cusr 20.30 csys = 77.94 CPU) Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we managed to load:
Module Name Have Want ExtUtils::MakeMaker 7.34 0 IO::Socket::IP 0.39 0.37 JSON::PP 2.94 2.27103 Pod::Simple 3.20 3.09 Time::Local 1.2000 1.2
Perl module toolchain versions installed: Module Name Have CPANPLUS 0.9176 CPANPLUS::Dist::Build 0.90 Cwd 3.74 ExtUtils::CBuilder 0.280230 ExtUtils::Command 7.34 ExtUtils::Install 2.14 ExtUtils::MakeMaker 7.34 ExtUtils::Manifest 1.71 ExtUtils::ParseXS 3.35 File::Spec 3.74 Module::Build 0.4224 Pod::Parser 1.51 Pod::Simple 3.20 Test2 1.302138 Test::Harness 3.42 Test::More 1.302138 version 0.9924
******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) **********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02. Powered by minismokebox version 0.68
Environment variables: AUTOMATED_TESTING = 1 NONINTERACTIVE_TESTING = 1 PATH = /usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/script:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/arch:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/arch PERL5_CPANPLUS_IS_RUNNING = 97947 PERL5_CPANPLUS_IS_VERSION = 0.9176 PERL5_MINISMOKEBOX = 0.68 PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.16.0 PERL_EXTUTILS_AUTOINSTALL = --defaultdeps PERL_MM_USE_DEFAULT = 1 SHELL = /usr/local/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/home/cpan/pit/bare/perl-5.16.0/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 1002 1002 EGID: $) = 1002 1002 ------------------------------- -- Summary of my perl5 (revision 5 version 16 subversion 0) configuration: Platform: osname=freebsd, osvers=11.1-release, archname=amd64-freebsd uname='freebsd fforc 11.1-release freebsd 11.1-release #0 r321309: fri jul 21 02:08:28 utc 2017 root@releng2.nyi.freebsd.org:usrobjusrsrcsysgeneric amd64 ' config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.16.0' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include' ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 4.0.0 (tags/RELEASE_400/final 297347)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lgdbm -lm -lcrypt -lutil -lc perllibs=-lm -lcrypt -lutil -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector' Characteristics of this binary (from libperl): Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF Locally applied patches: Devel::PatchPerl 1.48 Built under freebsd Compiled at Jul 26 2017 20:23:09 %ENV: PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/arch:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/arch" PERL5_CPANPLUS_IS_RUNNING="97947" PERL5_CPANPLUS_IS_VERSION="0.9176" PERL5_MINISMOKEBOX="0.68" PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.16.0" PERL_EXTUTILS_AUTOINSTALL="--defaultdeps" PERL_MM_USE_DEFAULT="1" @INC: /usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/t6M8vb8IBO/IO-Socket-IP-0.39/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.16.0/.cpanplus/5.16.0/build/SQ3fUnBd3q/Mojolicious-8.01/blib/arch /usr/home/cpan/pit/bare/perl-5.16.0/lib/site_perl/5.16.0/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.16.0/lib/site_perl/5.16.0 /usr/home/cpan/pit/bare/perl-5.16.0/lib/5.16.0/amd64-freebsd /usr/home/cpan/pit/bare/perl-5.16.0/lib/5.16.0